Interested in racing? We have collected a lot of interesting things about Mini Stock Car Racing Rules. Follow the links and you will find all the information you need about Mini Stock Car Racing Rules.


Mini-Stock Rules | Wake County Speedway

    https://www.wcspeedway.com/mini-stock-rules#:~:text=%20MINI-STOCK%20RULES%20%201%20side%20of%20car,any%20ford%20in%20a%20ford%20but...%20More%20
    none

Mini Stock Rules - Good's Raceway

    https://www.goodsraceway.com/mini-stock-rules/
    AGE REQUIREMENTS:. Minimum 14 years old with 1 year prior racing experience. Proof of …

Mini Stock Rules – Florence Motor Speedway

    https://www.fmspeedway.com/mini-stock-rules/
    Any chassis used must have come with a 4 cylinder engine option. Complete 6 point center section and rear down bars must be 1 – 1 ½” minimum diameter and .090 wall thickness minimum. No exhaust tubing, or crimped exhaust pipe bends in main cage. Main 4 points of roll cage must be welded to frame rail, or rocker panel.

Mini Stock Rules - Southern National Motorsports Park

    https://snmpark.com/rules/divisions/mini-stock-rules/
    No convertibles, mini vans, or trucks. No rear, mid, or opposed engines allowed. No AWD, AWD conversions, or 4x4 models permitted. Preapproval of any questionable make/model required. Overall weights: All racecars will weight a minimum of 2200 lbs with a 55% maximum left side weight. All weight rules are general specification.

Rules - Mini Stock Tour

    http://www.ministocktour.com/rules/
    LEFT AND RIGHT SIDE OF CAR MUST BE WITHIN 1” OF LENGTH OF EACH OTHER. *STRUT RODS ON LOWER CONTROL ARMS SUCH AS PINTO AND TOYOTA MAY BE ADJUSTABLE IN LENGTH BUT RETAIN STOCK MOUNTING POINTS. *OEM OR DIRECT FIT AFTERMARKET SWAY BARS ONLY. NO SPLINED TYPE. 1 5/16 INCH OR 33MM MAXIMUM DIAMETER. MOUNTING OPTIONAL.

Mini-Stock Rules | Wake County Speedway

    https://www.wcspeedway.com/mini-stock-rules
    MINI-STOCK RULES side of car must be within 1” of length of each other.. No splined type. 1 5/16 inch or 33mm maximum diameter. End link... versions of your same chassis. 1 single piston aftermarket caliper allowed in place of OEM. Spindles may be strengthened. *at least one end of spring must be in ...

UMP MINI STOCK RULES | cedarridgespeedway

    https://www.cedarridgespeedway.com/mini-stock-rules
    Must have stock front ends or rear ends. Can be locked. Must have all stock unaltered suspension. No racing springs, no racing shock, no wedge bolts. No bump stops or spring spacers. Rear wheels must be straight no rear steer. Can run camber bolts. Can run safety hub on right rear of vehicle. WHEELS & TIRES. Stock wheels or 8 in. maximum racing wheels.

MINI-STOCK RULES - Wayne County Speedway

    http://www.waynecountyspeedway.com/wp-content/uploads/2015/11/Mini-Stock-Rules.pdf
    MINI-STOCK RULES ELIGIBLE MODELS: Any domestic or foreign four-cylinder front or rear wheel drive sedan or coupe with a stock wheelbase between 87" - 104". All Chassis mounting points must be unchanged. No four wheel drives, pickups, mini vans, two-seat sport cars or mid engine cars. No Turbo, superchargers, or rotary powered cars.

2015 - 2019 NASCAR Mini Stock Rules - Evergreen …

    http://evergreenspeedway.com/wp-content/uploads/2011/03/2015-Mini-Stock-Rules.pdf
    Mini Stock Rules Page 3 7. ELECTRICAL SYSTEM 1. Must have working starter at all times. 2. Crank trigger ignition allowed. 3. A master on off switch must be located on the roll bar directly behind the driver’s seat and accessible from the outside, or on the dashboard just right of the center, and must be clearly labeled. 4.

2018 Mini Stocks Official Rules and Regulations

    http://www.ohswekenspeedway.ca/rules/TriTrackMiniStockRules2018.pdf
    Mini Stock – 2018 5 11.1 - Bumpers must be securely mounted. Fabricated bumpers allowed but must have a stock appearing cover and must be approved by official. 11.2 - Tow hook must be installed one on the front and one on the rear of the car for towing purposes. 12.0 – Glass 12.1 - All glass must be removed.

Race Classes and Rules | AMain Tracks / Silver Dollar RC …

    https://www.amaintracks.com/race-classes/
    The Modified 4WD Buggy division is for advanced/expert racers who wish to run 4-wheel drive buggies with modified motors for the most challenging and fastest divisions of racing at the track. The rules for this class are: Chassis: Any 1/10th off-road 4-wheel drive buggy style chassis. Motor: Any brushless motor. Generally this class will be 10.5T motors and lower.

Got enough information about Mini Stock Car Racing Rules?

We hope that the information collected by our experts has provided answers to all your questions. Now let's race!