Interested in racing? We have collected a lot of interesting things about Racing Alcohol Setup. Follow the links and you will find all the information you need about Racing Alcohol Setup.


Alcohol Race Engines - Fuel System Maintenance - Circle Track Ma…

    https://www.motortrend.com/how-to/ctrp-0702-alcohol-engine-maintenance/#:~:text=Many%20racers%20running%20carbureted%20alcohol%20systems%20keep%20a,the%20fuel%20pump%20to%20an%20external%20fuel%20can.
    none

Stinger S-1 Racing Alcohol - Insinger Performance

    https://insingerperformanceinc.com/race-fuel/stinger-s-1-racing-alcohol/
    Stinger S-1 Racing Alcohol. This 99.9% AA clear Alcohol is the highest quality available within the industry. Insinger Performance has been supplying methanol for 25+ years and S-1 Stinger Racing Alcohol has the #1 in its name for a reason, it’s the #1 choice of racers. S-1 WILL pass the water test and is used consistently in Drag Racing, Oval Track-Sprint Cars, Hydroplane Racing and …

Running Alcohol Tip Sheet | CT Racing

    http://ctracing.net/site/tip-sheets/running-alcohol-tip-sheet-2/
    We use a radiator overflow bottle filled with pre-mix, attach a hose from the bottom of the bottle to the fuel fittings on the carbs. Start the engine and run it for two or three minutes, leave the gasoline in the fuel system until the next ride. Engine and Fuel System Set Up

Alcohol and Octane - Sunoco Race Fuels

    https://www.sunocoracefuels.com/tech-article/alcohol-and-octane
    Methanol is commonly used “straight” – that’s why it’s called racing alcohol by many. Ethanol can also be used straight, and some racers do, but it’s more common to hear about E85, a blend of about 85% ethanol. Much has been said about the octane rating of alcohols. However, technically speaking, the octane ratings of alcohols can ...

Alcohol Race Engines - Fuel System Maintenance - Circle …

    https://www.motortrend.com/how-to/ctrp-0702-alcohol-engine-maintenance/
    Simply pull the alcohol carb, cap off the fuel feed lines that contain alcohol, bolt on the gasoline carburetor, and plumb a line from the fuel pump to …

Alcohol Tuning - Don Terrill’s Speed-Talk

    https://www.speed-talk.com/forum/viewtopic.php?t=28888
    Re: Alcohol Tuning. Post. by Dave Koehler » Sun Nov 13, 2011 3:17 pm. you won't like the answer. Plugs and ET. The WB and the EGT are used as confirmation. 2 out of the 4 should agree. Once you find the sweet spot the WB can be used to track issues that crop up. The EGT is used to tinker with cyl to cyl tuning.

Alcohol Fuel Conversion - Building a Gasoline/Alcohol …

    https://www.motortrend.com/how-to/ctrp-0309-alcohol-fuel-conversion/
    Our setup is underdriven by a small cog-belt pulley mounted to the mandrel. Troutman adjusted the pump to provide between 9 and 12 pounds of pressure at race speeds. Because alcohol can easily...

Top Alcohol Breakdown: How to apply a wrap on an NHRA Top ... - YouTube

    https://www.youtube.com/watch?v=GLlMg44_Fbo
    Top Alcohol Breakdown: Episode 1How to apply a wrap on a dragster by Fineline Graphics www.finelinegraphics.coFollow us on:Facebook & Instagram: @MeganMeyer....

Masters of methanol – drag racing fuel system tricks

    https://dragnews.com.au/masters-of-methanol-drag-racing-fuel-system-tricks/
    “What drag racers do with alcohol engines is crazy, we run compression ratios in the 10-12:1 ratio area and we are running 50-60 pounds of boost. The guys in the states with the C-rotor PSI superchargers are running 60 psi or more.” The benefits of methanol aren’t just in boosted applications.

Fuel System - gas and alcohol - Racingjunk Forums

    https://www.racingjunk.com/forums/showthread.php?t=18159
    You need to take the diaphram cover off the regulator and drill a 11/64 hole in the side and then tap the hole with a 1/8" NPT tap. Put a AN4 to 1/8 NPT elbow fitting in that hole and then drill and tap your intake or carb spacer and put another elbow there.

How do I use Methanol in a Drag racing application?

    https://www.speed-talk.com/forum/viewtopic.php?t=9935
    The carb will need to be designed completly for alcohol the boosters air bleeds emulsification tube etc. all need to be designed for alcohol. The fuel system will also have to meet the needs of an alcohol engine, this can be accomplished by the previously mentioned mechanical pump or by using an electric pump with a vacuum tapped regulator that will increase the fuel …

Got enough information about Racing Alcohol Setup?

We hope that the information collected by our experts has provided answers to all your questions. Now let's race!